Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / ISX 600: Trouble in paradise

new reply
ISX 600: Trouble in paradise
09-19-2022, (Subject: ISX 600: Trouble in paradise ) 
Post: #17
Rawze Online(Online)
Forum Reject  (14142 Likes)  *******

 		Posts: 11,344
Joined: Jun 2013
Thanks: 6012
Given 14142 thank(s) in 6228 post(s)
RE: ISX 600: Trouble in paradise
(09-15-2022 )Rocky Wrote:  ...
Unplugged the pressure sensor and discovered oil in the connector.
...

Every time I have seen oil pressure sensor bleeding oil into the connector, it was a bad sensor. I also have seen plenty of times where if it was doing this, you got the wrpng oil pressure readings too.

cleaning it and the contacts does nothing for "improving its readings" by the way, especially if it is bad because it is seeping oil.

If it is seeping oil.. replace it with a new OEM-only sensor... and look up the part# on quickserv instead of going by what you have already purchased, or the part# on the sensors itself. It is easy to get the wrong oil pressure sensor and it show the wrong scaling, readings, etc.

it can also be a saturated wiring harness, it now going bad, if it has been seeping for a long time.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: ISX 600: Trouble in paradise - Rawze - 09-19-2022



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication