9900ix Sleeper Rear Lights

[TBraun]

(09-29-2022 )Rawze Wrote:  any extra wiring from the inside of the cab to the outside should only ever come thru the firewall then wrap down under towards where it has to go.

Also, any wiring added needs t be properly fused .. and also needs to be covered in a layer of split-loom for it to be D.O.T. Legal.

There are already 2 factory lights installed. I wouldn't have to add wiring, other than the wiring going from the original lights to any additional lights I would add. The 2 factory lights are already on a switched/fuse circuit of there own. Those 2 lights are incandescent bulbs that I would think pull about 2 amps per bulb. If I install 6 LED's I don't think they will pull what 1 of the incandescent bulbs does now. I'm not concerned about the wiring circuit, just am not going to tear the sleeper apart to install.