| 4364 Fmi 18/ Poor Def |
| 10-29-2022, (Subject: 4364 Fmi 18/ Poor Def ) Post: #9 | |||
| |||
| RE: 4364 Fmi 18/ Poor Def Unilevers Offline Forum Reject (1296 Likes) ******* Posts: 765 Joined: Nov 2014 Thanks: 140 Given 1296 thank(s) in 478 post(s) RE: SPN 4364 FMI 18? this means that the nox reduction from the aftertreatment inlet and outlet nox sensors is not high enough. in otherwords the scr isnt working. if you drive it long enough with this issue it will get steadily increasing derates until your down to 1000RPM. Most of the time it is a bad nox sensor. it can also be a bad scr injector, bad urea, urea crystals in the decomp tube, wrecked SCR, bad dosing pump/plugged filter, or a leak in the urea system. force a regen and compare inlet to outlet nox - when the scr is dosing the outlet nox should be much lower than the inlet nox (outlet should run about 25ppm). User's Signature: It's hard to win an argument with a smart person, but it's damn near impossible to win an argument with a stupid person | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
4364 Fmi 18/ Poor Def - lesvraissavent - 10-28-2022, RE: 4364 Fmi 18/ Poor Def - hhow55 - 10-28-2022, RE: 4364 Fmi 18/ Poor Def - lesvraissavent - 10-28-2022, RE: 4364 Fmi 18/ Poor Def - hhow55 - 10-28-2022, RE: 4364 Fmi 18/ Poor Def - lesvraissavent - 10-28-2022, RE: 4364 Fmi 18/ Poor Def - hhow55 - 10-28-2022, RE: 4364 Fmi 18/ Poor Def - tree98 - 10-29-2022, RE: 4364 Fmi 18/ Poor Def - lesvraissavent - 10-29-2022, RE: 4364 Fmi 18/ Poor Def - Rawze - 10-29-2022, RE: 4364 Fmi 18/ Poor Def - lesvraissavent - 06-24-2024, RE: 4364 Fmi 18/ Poor Def - Rawze - 06-25-2024, RE: 4364 Fmi 18/ Poor Def - hhow55 - 10-29-2022, RE: 4364 Fmi 18/ Poor Def - hhow55 - 10-29-2022 RE: 4364 Fmi 18/ Poor Def - lesvraissavent - 11-14-2022, RE: 4364 Fmi 18/ Poor Def - RollinCoal - 11-14-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.