Vibration. Clutch or engine?

[Petegraintrain]

(11-25-2022 )Rawze Wrote:  had someone here one time with a vibration no one could find .. was in the enigne, it would be real bad at about 1400 rpm or so even in neutral.

turns out that it had a slightly bent (not visible by eye) connecting rod because they re-used the old rods during its recent inframe after the engine had hydra-locked previously and no one bothered to check them properly.

the quality of what repair shops do to these engines is complete s$it these days.. so one never knows any more.

this thing also has a vibration at 1400 even in neutral. But if I shut my engine off. Then restart it and rev it up to 1400. It takes about half a minute for the vibration to come back. And that vibration is worse some days than others.. I would think a bent connecting rod would vibrate the whole time it wouldn't take a bit for it to show up