Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / CM870 power issues

new reply
CM870 power issues
12-06-2022, (Subject: CM870 power issues ) 
Post: #7
kamiar Offline
Established  (0 Likes)  **

 		Posts: 4
Joined: Feb 2016
Thanks: 1
Given 0 thank(s) in 0 post(s)
RE: CM870 power issues
Hello all, We have a CM870, 565HP, all stock, on an engine dyno that is been calibrated recently, it makes close to 700HP and Pyro jumps to 1060F under full load, all sensors reading seems in range, new injectors, turbo, egr valve, etc, tried older calibration as well as latest, AB10352.23, when i am think about it, i had at least one more stock CM870 and that was also making around 680-700HP on the dyno, we have a straight pipe exhaust system on the dyno, any ideas?
Return to Top | find
replyreply
new reply


Messages In This Thread
CM870 power issues - Zocaid - 11-21-2022,
RE: CM870 power issues - Rawze - 11-21-2022,
RE: CM870 power issues - kamiar - 12-06-2022
RE: CM870 power issues - Rawze - 12-07-2022,
RE: CM870 power issues - Rawze - 12-07-2022,
RE: CM870 power issues - Rawze - 12-08-2022,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication