Cm570 injector leak test results.

[Rawze]

(12-08-2022 )Petegraintrain Wrote:  Rear Actuator
https://youtube.com/shorts/vhqJjDX5vps?feature=share

Front Actuator
https://youtube.com/shorts/KSQ91SEdqbI?feature=share

Did I somehow screw up the test to get inaccurate results? Or do I seriously have atleast 2 leaky injectors? Did everything the way Rawze explains in his Injector leak test videos. Only difference is my test plate didn't come with a gasket so I used the gasket from the actuator itself. The engine does have a shake/vibration at the 1400-1500 rpm range.

Just an FYI to start with... Did you run the overhead valve adjustment and set the injectors set screws properly according to torque spec?. If the overhead is not sdet correctly you will get false positives.



Assuming that the overhead valves and injectors are set correctly.. those videos show clearly there are issues with those injectors.. especially the bank that is making more bubbles. it definately has problems, and it looks like you did the test correctly to me.

Get it bubbling real good.. then as soon as you stop cranking it.. jump out fast, throw a wrench on the engine to turn it by hand and turn it swiftly as you can by hand and take not of where on the crank shaft damper that the bubbles occur. -= Then look at the guide and see what injector(s) it is.

Like others have said.. if you more than 2 leaking.. then its time to replace all 6. Be sure to test the new ones after install as well.