| Fixing a bad delete |
| 12-20-2022, (Subject: Fixing a bad delete ) Post: #5 | |||
| |||
| RE: Fixing a bad delete Spend some time reading what needs to be done. The head was a reworked Cummins, going to be replaced with a new one now, protrusion measures .005-.007 and counterbores were not cut last time. My question is can I reuse the liners since they only have 40,000 miles on the. Planning on pulling the liners and counter boring to get 0.014 protrusion. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Fixing a bad delete - 5jranch - 12-20-2022, RE: Fixing a bad delete - Waterloo - 12-20-2022, RE: Fixing a bad delete - Rawze - 12-20-2022, RE: Fixing a bad delete - 5jranch - 12-20-2022 RE: Fixing a bad delete - Rawze - 12-20-2022, RE: Fixing a bad delete - 5jranch - 12-20-2022, RE: Fixing a bad delete - Rawze - 12-21-2022, RE: Fixing a bad delete - tree98 - 12-21-2022, RE: Fixing a bad delete - Rawze - 12-21-2022, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.