ISM Cal File Needed

[El_mavi]

Hi Rawze, it is a 2001 T800 Kw made for Mexico market. It is owned by my dad and noticed it does not have the cal stated at quickserve. When we start the truck first thing in the morning it has a super rough idle and white smoke but we just turn it off and start it again and it is smooth. We have no idea why it does that but the first thing I wanted to do is get the right cal for the engine. Engine does not have the dataplate so I used Quickserve. I didn’t even know the cpl because Quickserve only says CPL “2”. Any ideas are welcomed. Thanks in advance.

(12-21-2022 )Rawze Wrote:  rawze.com is not a software trading site. That being said ...


The program name you mentioned is not part of any INCAL (factory engine file) collection that I can see. They stopped including the actual 'ISM' category after 2019, but in all the collections that I have. It is not in them ...

'oct-2012' - Many ISM L20* and L21* programs but not that one.
'aug-2013'- Many ISM L20* and L21* programs but not that one.
'aug-2014'- Many ISM L20* and L21* programs but not that one.
'feb-2015'- Many ISM L20* and L21* programs but not that one.
'feb-2019'- Many ISM L20* and L21* programs but not that one.
'dec-2020' - ISM category no longer included that I can see.
'feb-2021' - ISM category no longer included that I can see.
'aug-2022' - ISM category no longer included that I can see.

So, even as far back at 2012, there was no program 'L20302' available o the public that I can see. It is likely a vehicle manufacturers specific file, so you likely need to get with them instead of cummins if you want a replacement program.

what is the engine ser#?. What make/model vehicle?... etc.etc.