New motor time!

[jorden486]

Well here we go. Had a truck die in southern Utah. 1.2 mil on it-good driver in it. Said it started to knock really faint(empty) pushed the clutch in and coasted to the shoulder. Locked up after that. We rented a step deck and towed it home. It took me a bit to get it tore down-Its a mess. 5 of 7 cam bearing spun on the injector cam. The #4 rod cap was so welded to the crank it took a sledge and long rod to beat it off. The mains are all folded into the top bearing, just getting ready to spin. So after weighing the options we went with a Cummins factory reman. 2 year warranty new everything including ECM and wiring harness. Pictures to follow.