| Induction Heat Bolt Removal Tool is the BOMB! |
| 12-29-2022, (Subject: Induction Heat Bolt Removal Tool is the BOMB! ) Post: #1 | |||
| |||
| Induction Heat Bolt Removal Tool is the BOMB! I bought this one last week... $218, https://amzn.to/3G3qrPl It works! I used it today, took two minutes or there about on a baked on flare fitting on the turbo I am working on. I tried the wrench, the cheater wrench, another body, damn thing never budged. Two minutes with this baby, started smoking, and smoking, and then flacking and I took it off... Grabbed the 24mm wrench, and it moved with ease. I would highly recommend getting one of these if you are working on anything that is rusted or a real PIA to get off. The unit I linked to above has all of the induction wires to work on just about anything. Worth every penny in my book. User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Induction Heat Bolt Removal Tool is the BOMB! - Waterloo - 12-29-2022 RE: Induction Heat Bolt Removal Tool is the BOMB! - Bengy88 - 12-29-2022, RE: Induction Heat Bolt Removal Tool is the BOMB! - SquareOne - 12-30-2022, RE: Induction Heat Bolt Removal Tool is the BOMB! - Waterloo - 12-30-2022, RE: Induction Heat Bolt Removal Tool is the BOMB! - hhow55 - 12-30-2022, RE: Induction Heat Bolt Removal Tool is the BOMB! - Waterloo - 12-30-2022, RE: Induction Heat Bolt Removal Tool is the BOMB! - DVT873 - 12-31-2022, RE: Induction Heat Bolt Removal Tool is the BOMB! - Rawze - 12-31-2022, RE: Induction Heat Bolt Removal Tool is the BOMB! - Mrkentee - 02-05-2023, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.