Can't keep fuel equal in tanks. |
02-22-2023, (Subject: Can't keep fuel equal in tanks. ) Post: #29 | |||
| |||
RE: Can't keep fuel equal in tanks. (02-22-2023 )hhow55 Wrote: Could it be possible that the standpipe in the tank that has higher level of fuel be broken off, or have pinholes ? Yeah I'm sure it's possible. Problem I have is being able to properly check them. They are not removable, appear to be welded in the threaded tank port. I used a bore scope to look at the stand pipe while the engine was running, with the fuel level low so most of standpipe was not submersed in fuel. I did not see any fuel leaking around outside of pipe. This was after I removed the pump return from top of the tank. There was no fuel splashing in like there had been. I know it's not a definite test to say they aren't cracked, but I don't know what else to do. I'm not buying new tanks, that I know. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.