Leaking turbos after overhaul

[Rawze]

(03-11-2023 )INTERPRO Wrote:  Hi, can someone help me by looking over my cal files to check why my actiator position is at 18% when i am idling.

Thanks

copy the file out of the ecm and e-mail it to me. I will review it and ensure it is ok.

And by the way.. the MM for the cm871 sets the turbo at 48% at idle last I checked ... not 18%. What you have must be seriously out of date or something, or perhaps not from its official source.

It should be version '1505W'.