Fuel pump 2350. Can’t get toppets out.

[Rawze]

you need a whole new pump. If those rollers are chewed up like that then the crankshaft in the bottom of the fuel pump is toast too.

You also need to flush the oil system, drain the oil pan, remove it, and see how much shavings are in the oil. If you have been driving it like that for more than a day or so.. everything in the engine could be ruined at this point.

Also remove a main and rod bearing and inspect them .. inspect the engine crank shaft, check the face gears in the engine to see if they are pitted or chewed up,.. everything needs to be inspected to see how much progressive damage has been done.

Any metal shavings in the oil.. then the oil cooler will need replacing, the oil pump, and anything else that got pitted or damaged too + all rod-main bearings, etc.etc.etc. -= It is a huge undertaking to try and stop the progressive damage and to get all the metal shavings/flakes out of the engine after the fuel pump fails like that.