| stuck clutch pedal |
| 04-18-2023, (Subject: stuck clutch pedal ) Post: #11 | |||
| |||
| RE: stuck clutch pedal Ok, took a while to get the damn thing apart but it turned out to be the cable linkage that seized up. Peterbilt part: CABLE ASSY-CLUTCH 06-01521-0965 It seized up with the clutch partially disengaged leaving tension on the cable assembly. Had to remove the u-bolt securing the cable sleeve between the engine and frame rail to remove the tension from the clutch, then i was able to get the pin out and disconnect the cable. Once disconnected from the clutch cross shaft it was obvious that the cable seized. Of course no part in stock locally but hopefully they can overnight it so I can install it tomorrow. Thanks to everyone who helped steer me in the right directions. User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..." | |||
(Online)
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
stuck clutch pedal - JimT - 04-17-2023, RE: stuck clutch pedal - Bengy88 - 04-17-2023, RE: stuck clutch pedal - Bengy88 - 04-18-2023, RE: stuck clutch pedal - Papa_Buck - 04-17-2023, RE: stuck clutch pedal - JimT - 04-17-2023, RE: stuck clutch pedal - ktblogistics - 04-17-2023, RE: stuck clutch pedal - DVT873 - 04-17-2023, RE: stuck clutch pedal - JimT - 04-18-2023, RE: stuck clutch pedal - Rawze - 04-18-2023, RE: stuck clutch pedal - JimT - 04-18-2023, RE: stuck clutch pedal - JimT - 04-18-2023 RE: stuck clutch pedal - JimT - 04-19-2023, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.