Needed plumbing for Holset reinstall.

[Ironwagons]

(04-25-2023 )Rawze Wrote:  Might be cheaper if you go to a junk yard and get some of those secondary components off a wrecked engine?.

just a thought.


As far as what you need, just register your engine ser# over on quickserv.com. - It is free, and you will have access to all the drawings, parts lookup, repair procedures, etc. and other stufs for your engine just like any stealers$it would have.

I sucks having to put all that stuffs back on after someone makes those kinds of mistakes with the engine like that. I have met plenty of people who have had to go thru that.

Believe me when I say that every single one of those people deeply regretted ever going down that garbage no-vgt road. This, once they finally got the engine straitened out properly, and saw how much better the engine ran, performed, etc. when it was all put back right again and actual proper programming was installed to go with it.

Thanks Rawze, junk yards are far and few between in my area. But I will throw the part numbers in google and see what turns up. I have found quite a few used odds and ends.

yes I am sure he regretted it, I have a few of the service records and the money thrown at this engine was astronomical!