Load Based Speed Control Issue
04-27-2023, (Subject: Load Based Speed Control Issue ) 
Post: #23
RE: Load Based Speed Control Issue
(04-27-2023 )SquareOne Wrote:  ...
*** So reading through the @m*m^2 document, looks like '12' in the fueling state is the 'high-idle governor.' Now to raise that limit and we should be in business.

That is the max engine speed setting with zero VSS (engine not moving).

Raising the high idle governor will only make it idle up at a higher rpm when the vehicle is not moving ... and has nothing to do with the engine when it is going down the roads under load.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: SquareOne


Messages In This Thread
RE: Load Based Speed Control Issue - Unilevers - 10-19-2019,
RE: Load Based Speed Control Issue - Unilevers - 10-20-2019,
RE: Load Based Speed Control Issue - Rawze - 04-27-2023



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.