ISX CM871

[Rawze]

(06-12-2023 )Dieselboy Wrote:  ...
Rawze, I am headed down to the shop this morning. Is there anything I should ask them about while I'm there? Is there anything you'd like me to get closer pictures of? I can't thank you enough for posting your thoughts on my motor and the horrible situation it's in.

Its too late!... they already have it all apart and you were unfortunately naive enough to let them tear into it by trusting the network of OEM morons initially.

Might as well taken it to Half-arssed-rebuild-r-us.com. I see another premature eventual engine failure in its future. - As you will not be able to tell them how to do the job right, nor would they listen any ways. Those garbage-can OEM facilities have no clue how to build the engine to extend its life properly and it is what it is at this point.

Save you damn moneys like mad .. learn how to work on it and care for it PROPERLY - YOURSELF!,.. and eat the fact that you did not do nearly enough research + put way too much faith on those clowns to begin with. You are now at their mercy.. and believe me... whatever they do to it will be mostly half-arssed (barely by the book specs, half the s$it not even torqued properly, speed-gun happy no give-a-s#$it repairs, etc.), and will not last nearly as long as it should.