04’ cm870 coolant temp high

[Redland1]

(06-16-2023 )SquareOne Wrote:  

(06-16-2023 )Redland1 Wrote:  Yes! Lots of dirt roads and a lot of frac sand plants last year.Wonder if it’s the silica sand? When I put in the new radiator nothing changed but maybe it’s the CAC.
You think a quarter gallon aluminum brightener to 3/4 water is a good mix?

How long ago did you change the radiator? For us, it didn't take very long for the buildup to knock out the heat exchange efficiency, but these machines were also putting in 8-10hr+ days in the dirt. I would assume that a new rad should've changed something if it were in fact compromised.

- Yea, I think you could start there and see what it does. It should begin working fairly quickly. Maybe concentrate on a small area just to see if any residue comes off. Should be a visible difference if anything is baked on.

*BTW, was the system properly filled with coolant after the radiator replacement? Was a vacuum pulled? Possibly some air hanging around if not...

It was changed about 2 months ago but only had it for a month before I took it back to the stealership to see if they would warranty it because it sprung a leak on the first week.Got the old one repaired and put it back on.

I did vacuum the system