| Liner O-ring failure |
| 06-20-2023, (Subject: Liner O-ring failure ) Post: #10 | |||
| |||
| RE: Liner O-ring failure #2 and #4 pistons are showing signs of leaking injector. Make sure, at a minimum, that you put new injectors in those 2 holes. Also there is a lot of impingement on the pistons as a whole. -= I would blame the bad injection timing on this.. likely from back when it had the bad de-mandate in it. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Liner O-ring failure - Truckdriven - 06-19-2023, RE: Liner O-ring failure - tree98 - 06-19-2023, RE: Liner O-ring failure - Truckdriven - 06-19-2023, RE: Liner O-ring failure - Mr Hagg - 06-19-2023, RE: Liner O-ring failure - Rawze - 06-19-2023, RE: Liner O-ring failure - Truckdriven - 06-19-2023, RE: Liner O-ring failure - Truckdriven - 06-19-2023, RE: Liner O-ring failure - Truckdriven - 06-19-2023, RE: Liner O-ring failure - Truckdriven - 06-19-2023, RE: Liner O-ring failure - Rawze - 06-20-2023 RE: Liner O-ring failure - Truckdriven - 06-20-2023, RE: Liner O-ring failure - Rawze - 06-20-2023, RE: Liner O-ring failure - Truckdriven - 02-27-2024, RE: Liner O-ring failure - tree98 - 02-27-2024, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.