CM871

new reply

Threaded Mode | Linear Mode

CM871

07-04-2023, (Subject: CM871 )

Post: #5

Nostalgic Offline

Contributing Member (546 Likes)

Posts: 628
Joined: Apr 2017

Thanks: 664
Given 546 thank(s) in 286 post(s)

RE: CM871 rebuild and liner height question

(07-04-2023 )Dieselboy Wrote:
(07-04-2023 )Truckdriven Wrote: Here's where Rawze directed me on mine....

https://rawze.com/forums/showthread.php?...6#pid70606

This is great. Thanks so much. Does it matter on the HP configuration for the motor?

Other than the information already shared (which probably answers your question if you read it all), Yes, HP does matter. The higher the HP, the more setting liner height correctly matters. You'll want 0.015" AND MEASURED WITH THE LINER COMPRESSED EVENLY AND TORQUED TO SPEC WITH THE PROPER TOOL.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

CM871 - Dieselboy - 07-04-2023,

RE: CM871 rebuild and liner height question - Truckdriven - 07-04-2023,

RE: CM871 rebuild and liner height question - Dieselboy - 07-04-2023,

RE: CM871 rebuild and liner height question - Nostalgic - 07-04-2023

RE: CM871 rebuild and liner height question - hhow55 - 07-04-2023,

RE: CM871 rebuild and liner height question - Rawze - 07-05-2023,

RE: CM871 rebuild and liner height question - Dieselboy - 07-07-2023,

RE: CM871 rebuild and liner height question - tree98 - 07-07-2023,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.