Cm2250 derate

[Aleeex]

(07-18-2023 )Rawze Wrote:  Pull the down-pipe away from the first exhaust can and see if it picks up power/boost on a test drive. Maybe the exhaust is clogging up?.

you can also make you a screen file in CT to see what might be holding it back. The CBL_fuel_State being the most important setting to monitor, along with a few other power related settings ...
ref: http://rawze.com/forums/showthread.php?t...3#pid58693

I have no cans, which brings me to next question. Where are the terminating resistors located?

Maybe my muffler is collapsing? Can the factory flex pipe implode?

I’ll do an ohm test on the weatherproof connector when I stop.