ISX crankshaft gear

[KCMshop]

(09-08-2023 )Colter Wrote:  350/400F is enough however I leave the gear and adapter in the oven for 6-8 hours and we still need to move fairly quick. The crank will pull the heat out of the gear quite quickly and you may be having issue due to the components not being at an even temperature

Hi Colter thanks for the reply.
You are talking about the gear not the adapter correct?
Do you have to beat it on?
Do you have a better idea then the small C-clamp cummins depth setting tool.
Again thanks for the reply!