CM2350 Derate-Low DEF

[Rawze]

I was sent the program from this persons truck today. The plot thickens ...

Looks like I might have called it ...

(09-11-2023 )Rawze Wrote:  ...
First and foremost though.. ALSO MAKE DAMN SURE THAT the program in your engine is the EXACT ONE FOR THE ENGINE SER# AND VEHICLE!... AND THAT IT IS UP TO DATE (within 6 months old).
...

According to the VIN# and engine serial#,

The program in the ecm IS THE WRONG PROGRAM.

Not only is it the wrong program in the ecm, but this program that someone shoved in there at some point also CALLS FOR AN EXTRA PM(SOOT) AND OTHER AFTER-TREATMENT SENSORS, that are not likely even on the da$mn vehicle!.

No wonder this guy can't solve his aftertreatment issues. Nothing in the program is compatible with his truck or engine!.... nonetheless the aftertreatment system.


This makes me now wonder.. WHO DID THIS??>>>. WHO PUT THE WRONG PROGRAM IN THE ECM?.

It also looks like a clear attempt/case of some completely clueless fool, who had no clue what they were doing, trying to "turn up the power". The program in it is set at much higher HP than what the engine originally had. I can only assume for the moment that someone "wanted more power" and some clueless person shoved a higher HP program into it with absolutely no regard to the consequences for program/engine incompatibility!.

Between the program it calls for and the program sent to me ...

== The pistons and engine compression ratio do not match.
== The Injectors/hardware do not match.
== The Turbochargers do not match.
== The Entire After-treaement systems do not match.
== The da@mn CAC and entire intake and exhaust flow dews not match.

== h#ell, nothing matches!. It is about as incompatible as it gets.

Did the truck owner do this?. Did they pay someone to do it?... Who did this to this truck?.

I e-mailed you back my Phone #. Gimme a ring so that we can get to the bottom of this and what to do about it.