ISX oil pressure problems |
09-29-2023, (Subject: ISX oil pressure problems ) Post: #3 | |||
| |||
RE: ISX oil pressure problems Running it with zero oil pressure is a mistake!! You might have already eaten the bearings out of it. If it were mine I would hook up an external pump and push 30-35 psi of oil into the motor (engine not running) while looking at the bottom end bearings and cam bearings ( oil pan and valve cover off) you could be losing all your pressure through a spun bearing. Actually you could find a spun bearing on the bottom end pretty easy just by removing the caps. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
ISX oil pressure problems - Therealarw - 09-29-2023, RE: ISX oil pressure problems - SquareOne - 09-29-2023, RE: ISX oil pressure problems - Rawze - 09-29-2023, RE: ISX oil pressure problems - Therealarw - 09-29-2023, RE: ISX oil pressure problems - tree98 - 09-29-2023 RE: ISX oil pressure problems - Rawze - 09-29-2023, RE: ISX oil pressure problems - tree98 - 09-29-2023, RE: ISX oil pressure problems - SquareOne - 09-29-2023, RE: ISX oil pressure problems - Rawze - 09-30-2023, RE: ISX oil pressure problems - Therealarw - 09-30-2023, RE: ISX oil pressure problems - tree98 - 09-30-2023, RE: ISX oil pressure problems - Therealarw - 10-02-2023, RE: ISX oil pressure problems - JMBT - 10-02-2023, RE: ISX oil pressure problems - Therealarw - 10-02-2023, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.