Cab mount bushings |
09-24-2016, (Subject: Cab mount bushings ) Post: #12 | |||
| |||
RE: Cab mount bushings I believe the mechanic at the dealer that I watched replacing these used a YUGE breaker bar or torque wrench, and he had help. Then he beat them out with a small sledge hammer if I remember correctly. I'll just run my truck up there and let them do it, he had it done in like 1/2 hour, both sides. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Cab mount bushings - CFR__AND_SONS - 09-22-2016, RE: Cab mount bushings - Brock - 09-22-2016, RE: Cab mount bushings - Waterloo - 09-22-2016, RE: Cab mount bushings - CFR__AND_SONS - 09-22-2016, RE: Cab mount bushings - Kevin7898 - 09-22-2016, RE: Cab mount bushings - Rawze - 09-22-2016, RE: Cab mount bushings - Brock - 09-22-2016, RE: Cab mount bushings - PuroCumminsPower - 09-22-2016, RE: Cab mount bushings - Rawze - 09-23-2016, RE: Cab mount bushings - Waterloo - 09-23-2016, RE: Cab mount bushings - CFR__AND_SONS - 09-24-2016, RE: Cab mount bushings - Waterloo - 09-24-2016 RE: Cab mount bushings - biscuits and gravy - 09-24-2016, RE: Cab mount bushings - hhow55 - 09-24-2016, RE: Cab mount bushings - CFR__AND_SONS - 09-26-2016, RE: Cab mount bushings - Waterloo - 09-26-2016, RE: Cab mount bushings - axe - 09-26-2016, RE: Cab mount bushings - Rock hound trucking - 11-23-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.