Helping Nilao out with an inframe ...

[Hammerhead]

(09-24-2016 )Nilao Wrote:  The pulley was the hard part. We had to put a 3 jaw puller on it and hit between it and the balancer with a metal chisel while heating it with a torch. The balancer itself came of with a pry bar and a few smacks with a 2.5 lb hammer.

That sounds a little tougher than mine was...can't remember who's sig line it is, but I couldn't agree more with this particular part, copper coat anti-seize the crap out of it! You'll love yourself if you're the next poor bastard to have to change it down the line