Help! Cm2250 started boosting 40+ psi

[Biltpeter]

(11-04-2023 )tree98 Wrote:  Has the check engine light come on at all?

Could be a problem with the gauge or its sensor, have you hooked up to it with insite and confirmed the gauge is reading correctly?

Until you figure it out, don't let it boost that high.

No check engine light
I did a data log with insight and got 86.1inhg or 42.288 PSI so unfortunately the gauge is reading correctly..
I will not be driving it until i get this resolved.
thank you for your input and suggestions!!