cm870 loaded up |
12-09-2023, (Subject: cm870 loaded up ) Post: #9 | |||
| |||
RE: cm870 loaded up (12-09-2023 )Kenworth900 Wrote: Well I feel like I was just scolded! Guess I’m learning but getting beat up in the process. At this point, with all the installed after-garbage components + piled on top of that, a no-vg turbo.. your screwed!. No one can help you, and your on the wrong damn forum if your looking for sympathy or help to try to make nothing but after-garbage junk that has been hobbled together at this point work for you. - It cannot be done properly, so if this is not the answers your looking for then you are on the wrong damn forum!. If your not ready to start reversing all these bad decisions then you need to go back to social madai where that kind of half-arssed engine building is praised by all the fools who believe in flat earths and green aliens, etc.. because around here that s$it don't fly!. WooW! someone saw you coming is all I can say.. That or your desire to save a few$$$ on those after-crap components (or were too damn impatient to gather what was needed properly, etc. whatever dumbarrsse excuses) was the worst damn thing you could have ever done to it. Good luck with that, as no one here on this forum is going to help you perpetuate this absolute trash. What an absolute shame to do that crap to a $40,000 commercial enigne. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
cm870 loaded up - Kenworth900 - 12-09-2023, RE: cm870 loaded up - Bengy88 - 12-09-2023, RE: cm870 loaded up - Colter - 12-09-2023, RE: cm870 loaded up - Bengy88 - 12-09-2023, RE: cm870 loaded up - Rawze - 12-09-2023, RE: cm870 loaded up - Rawze - 12-09-2023, RE: cm870 loaded up - Kenworth900 - 12-09-2023, RE: cm870 loaded up - Rawze - 12-09-2023 RE: cm870 loaded up - tree98 - 12-09-2023, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.