CM871 Cam and Injector gear slip

[Rawze]

I have done a whole bunch of them.. never had one slip.

Matter of fact, the gears are an absolute b$itch to remove if done 100% correctly... nonetheless will slip.

Here is a video on how I do it...





So... if it was done exactly like this video shows.. you would be hard pressed for it to ever slip.

The only thing that would cause it to slip if installed exactly like that video shows, is if the cam(s)
were binding up .. I.E.> valves or rocker shafts not set right, etc.

What is the detent clearance?... and is it a certified OEM head?... or something else?.

Is it all OEM camshafts, rockers, etc.?... or something else?.

ref: http://rawze.com/forums/showthread.php?t...66#pid9466