CM871 Cam and Injector gear slip

[Rsansing]

(12-13-2023 )Rawze Wrote:  I have done a whole bunch of them.. never had one slip.

Matter of fact, the gears are an absolute b$itch to remove if done 100% correctly... nonetheless will slip.

Here is a video on how I do it...





So... if it was done exactly like this video shows.. you would be hard pressed for it to ever slip.

The only thing that would cause it to slip if installed exactly like that video shows, is if the cam(s)
were binding up .. I.E.> valves or rocker shafts not set right, etc.

What is the detent clearance?... and is it a certified OEM head?... or something else?.

Is it all OEM camshafts, rockers, etc.?... or something else?.

ref: http://rawze.com/forums/showthread.php?t...66#pid9466

Head is aftermarket. Did everything in the video except replacing the retaining washers. I have the old style and was unaware they could not be reused. Ordering new ones today. Thanks!