Tools |
09-26-2016, (Subject: Tools ) Post: #16 | |||
| |||
RE: Tools OK, So I got Nileo to try to use the heavy duty 1/2 Dewalt cordless impact 20v gun I have here that belongs to Vin to tighten some of the main bearing caps yesterday out of curiosity. It will only turn them just a bit past 140 degrees (about 350 ft-lbs or so). This was with a fresh battery. They are supposed to be turned 180 degrees, upwards of close to 500 ft-lbs. Just throwing that out there for reference. BTW: thanks again for the donation. It is much appreciated. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
RE: Tools - Hammerhead - 09-24-2016, RE: Tools - Old Driver - 09-25-2016, RE: Tools - arch stanton - 09-25-2016, RE: Tools - Hammerhead - 09-25-2016, RE: Tools - Rig Wrench - 09-25-2016, RE: Tools - Rawze - 09-26-2016 RE: Tools - Signature620 - 09-26-2016, RE: Tools - arch stanton - 09-26-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.