N14 ecm flash problems

[windowrattler]

I've bricked every celect plus ecm I've flashed in truck. I've also had 100% success flashing celect plus ecms.

Every time it "bricks". To rom boot it you disconnect the batteries for 5-10 minutes. Reconnect batteries. Key on for 5 seconds. Key off and connect to the truck with insite with the key off. It should be in rom boot when it connects. . Select calibration in insite and flash it with the key off. Sometimes I've had to do the procedure a few times to get it to rom boot. I'll try and find the actual document for it.