Injector cam bearings

[Rawze]

Why do you need an entire engine?. - Did the old one get a hole in the block?.

some history... etc?.

And you keep saying you ain't got no moneys.. THAT IS A REALLY BAD PLACE TO BE IN TRUCKING!!!... ESPECIALLY AS A TRUCK OWNER!!!!....

If you cannot afford to finance and properly maintain/replace proper components on your truck and do proper repairs then you need to go get a job as a company driver for a while and save up to do the repairs right.

As far as engine is concerned ... If it actually needs replacing due to not being able to inframe it at all ... then put back in it what came out of it,.. plain ans simple.

And if the engine is in bad enough shape to need an inframe.. then that is the best opportunity to INVEST IN THE TRUCKS PROFITABILITY AND FUTURE by going all out and making that enigne into a million mile gem that will give lots of years of service life (and profits) .. instead of trying to replace it with something just as questionable and wasting all your damn moneys.
ref: http://rawze.com/forums/showthread.php?t...6#pid70606

(Nickel and Dime trucking) ...
I kick people off of here for constantly saying/bic#ching that their broke all the damn time and then trying to nickel their way thru their repairs and trucking operations. There is no place for half-arsse, band-aide trucking on my forum!!. There is no profit or moneys in doing things that way and nothing but grief for everyone with that general attitude, and I do not want it to be a part of this place!.

so WAKE THE H##$LL UP AND START FIGURING OUT WHAT YOUR DOING SO DAMN WRONG TO BE SO DA$M BROKE AS A TRUCK OWNER !!!. GET A DAMN HANDLE ON WHATEVER BAD DECISIONS YOU HAVE MADE OR GO BACK TO BEING A COMPANY DRIVER UNTIL YOU CAN GET ENOUGH CAPITOL TO DO THINGS RIGHT AND RELIABLY AND START OVER!.