Main and Rod Bearings CM870

[Andre_The_Giant]

Thank you Rawze! I’m going to get some new bolts this morning and try again, I know my impact gun is exceeding 500+ ftlb because when I use it on my lug nuts my 3/4” torque wrench confirms. If New bolts don't go the full 180 degrees I’m guessing my 1/2” torque wrench is wrong for initial 110 ftlb or threads in the block damaged? I’ll let you know how things go at them end of today.

As for priming, so I take the oil check valve out/ leave port 2 open and pump in from port 5??? Any chance you have a link to what kinda pump I’ll need? The old links on old posts aren’t working. I’ll get one ordered up today, an also ordered some fittings for port 5. if I can’t find an inline filter I’ll just keep pumping cheap new oil. As much as I hate to waste, this is my only truck and it being down is costing me money, hopefully I can find a pump tonight