CM871 Oil sample help

[MSPOIRIER]

(01-07-2024 )Rawze Wrote:  You need to drop the pan and start inspecting things. Something is very wrong somewhere if that iron is not from it sitting and rusting away.

Yes, My thoughts too. I pulled the second sample because it seemed almost bad sample kind of high, especially with a truck running fine. The second sample seemed to show a drop but still very high. But honestly I cannot rule out the sitting and rusting away part. I bought it a couple years ago with 130k on it. An 09 with 130k in 2020 definitely sat somewhere for a little bit!

Thanks!