Cm2350 miss/pop around 20-25 psi boost |
01-25-2024, (Subject: Cm2350 miss/pop around 20-25 psi boost ) Post: #5 | |||
| |||
RE: Cm2350 miss/pop around 20-25 psi boost What about the plug on the head under the intake manifold.. (if the aftermarket head has it like the OEM’s do) maybe it isn’t sealed or tight and it is allowing boost to leak when it gets to 20-25psi but not before?? Other then that I would suspect the VG isn’t operating properly maybe because of restrictions or the actuator.(mechanically or through bad programming) User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!! | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Cm2350 miss/pop around 20-25 psi boost - Aleeex - 01-24-2024, RE: Cm2350 miss/pop around 20-25 psi - Rawze - 01-25-2024, RE: Cm2350 miss/pop around 20-25 psi boost - Aleeex - 01-25-2024, RE: Cm2350 miss/pop around 20-25 psi boost - Rawze - 01-25-2024, RE: Cm2350 miss/pop around 20-25 psi boost - JMBT - 01-25-2024 RE: Cm2350 miss/pop around 20-25 psi boost - Rawze - 01-25-2024, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.