Turbo Actuator code

[Mrkentee]

(09-27-2016 )Palazon Wrote:  Rawze: Polite suggestion. While your videos on EGR tune were a blessing (thanks again), you didn't mention what tool you use to clean out the pipes. I was thinking (after I finished of course) that an opened up or straight toilet brush might work well to remove the caked on crud. That would also allow folks to use bulk carb cleaner instead of 6+ cans like I used.

Is that what you use on the interiors or do you use the parts cleaner machines loaded with carb cleaner?

I've used simple green and a scrub brush in a bucket with great results. (Obviously only on parts that won't be damaged by water.) thoroughly dry and you're good to go.