Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / isx torque guage questions

new reply
isx torque guage questions
02-11-2024, (Subject: isx torque guage questions ) 
Post: #15
Rawze Offline
Forum Reject  (14146 Likes)  *******

 		Posts: 11,348
Joined: Jun 2013
Thanks: 6014
Given 14146 thank(s) in 6232 post(s)
RE: isx torque guage questions
It sounds to me like your dealing with a whole mess of issues there actually.

Bad deletes and more bad deletes.. and engine failures because of it.. + the typical mysterious power losses .. and 38-psi boost?... THAT IN ITSELF IS AN ENGINE KILLER ALONE!!.. FOR A Cm2350.

There are ways to do things 100% rught.. and it sounds to me like you have been a victim of the typical gaggle of under-educated repair and other shops out there that are getting more and more clueless every year.

I PM'd you my number so that we can discuss all of this,.. I don't want to write a book on all the issues you have described.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
new reply


Messages In This Thread
RE: isx torque guage questions - Rawze - 02-11-2024



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication