Cm871 help!

[TwinD]

So the egr cooler was removed and was replaced with this dummy piece and it has coolant lines running into it. I was hoping I was wrong and coolant ran through there still(this is my first truck new enough to even have egr so I'm completely clueless as to how they're supposed to work). So I took the line off at the back of the water pump and it is completely dry so somehow whoever did this demandate managed to block the line from in the water pump. I don't understand at all how that would even be possible but that sure seems to be the case. It looks to me like someone did a whole hell of a lot of work to do an absolutely horrible demandate. It has block plates everywhere that I've read on here that they need to be and they're all in place and solid. Also my ebay special got delayed and is now showing it'll be here Tuesday. I guess I'll get my coolant lines figured out and ran proper then once that gets in I'll get copy of the programming sent to you and see how bad they did on the programming side. Looks like I'm apart of the bad demandate club