(02-11-2024 )Rawze Wrote: (02-11-2024 )aarmon8908 Wrote: My mechanic has already checked the battery connections. I will get him to recheck the starter cables tomorrow. I did just recently buy an ecm, but I wanted to try EVERYTHING first before taking my truck 4 hours away to the tuner (Trucks deleted) This is the original ecm and I've driven the truck about 160k mi since the delete with no issues until recently
You need to copy that program out of that ecm yourself and stop using 'tuning guys' and then relying on 'how it feels', as a measure of how bad that delete program may or may not be. More than 90% of all de-mandate programs are absolutely harmful to the engine and cause progressive damage that sets in over time, and it has nothing to do whatsoever with 'how it feels' or anything else you can measure externally.
Get yourself a cheap win10 laptop.. a $300 inline-6 kit data-link adapter and copy it out yourself. Stop setting yourself up for 'relying/trusting blindly on other places' for something that most of the truck owners around here can figure out on their won. Besides that, everyone who owns a red cry-baby should have at least the software and tools (Insite and CT) to see what it is crying about when that Check engine light comes on.
- Its like having to call the TV repair man and pay a service fee to help you change the channels on your Television because you are missing the remote control, and there are no buttons on the TV itself. how about instead.. BUY THE DAMN REMOTE!
Copy out and E-mail that program to me for a proper review of what someone did in there, and stop that issue of having to rely on someone else in its track once in for all. Or simply calling them up and asking them for a copy of the program that they made for you and flashed into your ecm. -If you get a refusal or an excuse ... then RUN LIKE H#ELL THE OTHER WAY!!.
Of all the people that I know and have seen that actually do proper programming work, they would all tell you, and would recommend to you, that you having a copy of your own custom program is a good idea, ... just so that you have it in case the ecm ever dies, etc.
Beside that, as a truck owner YOU ABSOLUTELY need a copy of any custom programming that was done to the truck/engine. This makes it where you are not dependent on some joe somewhere that is going to charge you whatever they like just to 'make your truck work again' whenever you have an issue like this. It is bad business practice to put yourself in this situation.
I have inline software in my laptop. can you show me how to copy my ecm original program to video. i had original program on it
