Insite issue, fault will not clear ...

[Rawze]

If the fault is still occurring (it is ACTIVE) .. being low coolant in this case ... it would immediately come back as soon as its cleared.

It would be pointless to try to clear a fault that is still occurring, and the Insite software knows this. Therefore Insite does not allow you to reset it.

YOU NEVER EVER EVER WANT TO BYPASS A LOW COOLANT ALARM!!!!....

JUST LIKE YOU NEVER EVER EVER WANT TO BYPASS A LOW OIL ALARM!!!.

BOTH OF THEM ARE THE 2 MOST IMPORTANT ALARMS TO HAVE WORKING CORRECTLY FOR ENGINE!!!.

FIX THE LOW COOLANT PROBLEM and the fault will become INACTIVE!.. DO NOT try to bandaide or hide the issue!.


I have seen plenty of people bypass or defeat a low coolant alarm because they were too cheap to fix the problem ... only for a couple years later for their engine to get completely destroyed going down the road when it actually DID suddenly have low coolant!.