| Fan clutch issues |
| 03-16-2024, (Subject: Fan clutch issues ) Post: #3 | |||
| |||
| RE: Fan clutch issues The Horton is like the borg one just uses Eddy currents to drive the fan when not engaged hence the two speed speed rating. As far as fan balance I'm unsure there is no damage to the fan that I'm aware of. I can slightly slow the air leak by grabbing the fan and pushing/pulling one side forward/backward there's no real movement in the fan when doing this but it changes the air flow. so I would say the leak is from the clutch internals not from the carbon seal area. User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Fan clutch issues - Lonestar10 - 03-16-2024, RE: Fan clutch issues - Rawze - 03-16-2024, RE: Fan clutch issues - Lonestar10 - 03-16-2024 RE: Fan clutch issues - DVT873 - 03-16-2024, RE: Fan clutch issues - hhow55 - 03-16-2024, RE: Fan clutch issues - JimT - 03-16-2024, RE: Fan clutch issues - Lonestar10 - 03-18-2024, RE: Fan clutch issues - Yauchout - 03-19-2024, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.