X15 calibration change

[Birdman]

Hi rawze, thanks for letting me be apart of this forum!
I have a 2018 w900 with an x15 efficiency series CM2350a
500hp 1800ft lb calibration
CPL 4342
HD10200.18
We are looking to turn it to 565 and wasn't sure if the calibration file for a 4343 @565hp 2050tq would be acceptable in it. From looking through the build lists of the two motors it looks like the pistons. Any insite on this would be greatly appreciated. Truck is going to start hauling trains and he is an owner operator who is also has alot of mechanically sympathy.