| ISB 6.7 CM2150 problem |
| 04-23-2024, (Subject: ISB 6.7 CM2150 problem ) Post: #6 | |||
| |||
| RE: ISB 6.7 CM2150 problem How did the cold and hot side blades look on the turbo? If deposits build up the weight slows the speed and chokes it for air. Was a problem with midrange MaxxForce DT's. Have had them that couldn't get past 1300 RPM. Pull the turbo, block the oil feed and right to high idle, 2800 RPM. Probably not your issue but worth checking. | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
ISB 6.7 CM2150 problem - Stovedude - 04-22-2024, RE: ISB 6.7 CM2150 problem - Rawze - 04-22-2024, RE: ISB 6.7 CM2150 problem - Stovedude - 04-22-2024, RE: ISB 6.7 CM2150 problem - Rawze - 04-23-2024, RE: ISB 6.7 CM2150 problem - Stovedude - 04-23-2024, RE: ISB 6.7 CM2150 problem - Rawze - 04-23-2024, RE: ISB 6.7 CM2150 problem - DVT873 - 04-23-2024 RE: ISB 6.7 CM2150 problem - Stovedude - 04-24-2024, RE: ISB 6.7 CM2150 problem - Notch - 04-30-2024, RE: ISB 6.7 CM2150 problem - Rawze - 05-01-2024, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.