Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / CM2350 factory file comparrisons...

new reply
CM2350 factory file comparrisons...
05-05-2024, (Subject: CM2350 factory file comparrisons... ) 
Post: #77
Rawze Offline
Forum Reject  (14140 Likes)  *******

 		Posts: 11,342
Joined: Jun 2013
Thanks: 6009
Given 14140 thank(s) in 6226 post(s)
RE: CM2350 factory file comparrisons...
(05-04-2024 )DPS567180 Wrote:  
(04-04-2017 )Rawze Wrote:  ...
For CPL3937 engines. ...
Code:
EF10044 = 450HP/1750trq@1800 RPM. Smart torque reduces torque to 1550 after a short bit.

EF10074 = 475HP/1650trq@1800RPM. It has NO smart torque and has higher torque from 1500RPM and above compared to EF10044 due to the HP increase but slightly less torque (1650 peak) below that.

I have CPL 3937 400ST not demanded my program is EF10049. I run that I-40 from Arizona to Oklahoma and back. Is there a program that will allow me to pull hills a little better but not kill my fuel mileage?

Program EF10074 is 100% compatible with program EF10049.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: DPS567180
new reply


Messages In This Thread
RE: CM2350 factory file comparrisons... - Rawze - 05-05-2024



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication