Exhaust paint and/or wrap

new reply

Threaded Mode | Linear Mode

Exhaust paint and/or wrap

05-05-2024, (Subject: Exhaust paint and/or wrap )

Post: #5

JimT

Mostly Harmless (1063 Likes)

Posts: 1,163
Joined: Jun 2019

Thanks: 1106
Given 1063 thank(s) in 605 post(s)

RE: Exhaust paint and/or wrap

From VHT's website:

Quote:Curing FLAMEPROOF™
VHT FLAMEPROOF™ Coating only attains its unique properties after correct curing (refer to instructions on the can).

On the Vehicle:
Paint must be completely dry before curing
Run at idle for 10 minutes
Cool for 20 minutes
Run at idle for 20 minutes
Cool for 20 minute
Run under normal operating conditions for 30 minutes

Off the Vehicle:
Paint must be completely dry before curing
Heat to 250°F (121°C) for 30 minutes
Cool for 30 minutes
Heat to 400°F (204°C) for 30 minutes
Cool for 30 minutes
Heat to 650°F (343°C ) for 30 minutes

User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Exhaust paint and/or wrap - JimT - 04-30-2024,

RE: Exhaust paint and/or wrap - Mal4shtf - 05-04-2024,

RE: Exhaust paint and/or wrap - JimT - 05-04-2024,

RE: Exhaust paint and/or wrap - Nostalgic - 05-05-2024,

RE: Exhaust paint and/or wrap - JimT - 05-05-2024

RE: Exhaust paint and/or wrap - Chamberpains - 08-11-2024,

RE: Exhaust paint and/or wrap - Rawze - 05-05-2024,

Code scanner with clearing ability - ricstar - 05-07-2024,

RE: Exhaust paint and/or wrap - JimT - 05-08-2024,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.