Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Ask Your question... / Insite issue, fault will not clear ...

new reply
Insite issue, fault will not clear ...
05-09-2024, (Subject: Insite issue, fault will not clear ... ) 
Post: #11
Ninja Offline
Established  (1 Likes)  **

 		Posts: 2
Joined: May 2024
Thanks: 1
Given 1 thank(s) in 1 post(s)
RE: Insite issue, fault will not clear ...
(03-13-2024 )DVT873 Wrote:  If it is the type where the sensor tip is in the coolant sometimes they get a buildup of crud on them that insulates it from the coolant. Sandpaper the crud off and most times they will start working.

I have had this issue too i went round and round checking wiring and other things then ended up changing the sensor because it looked like it had rust on it and it took care of the issue
Return to Top | find
replyreply
 Thanks given by: Rawze
new reply


Messages In This Thread
RE: Insite issur - tree98 - 03-13-2024,
RE: Insite issur - Rawze - 03-13-2024,
RE: Insite issur - 3406E - 03-13-2024,
RE: Insite issue, fault will not clear ... - Ninja - 05-09-2024



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication