Connection issues with a N14 and M11 |
05-29-2024, (Subject: Connection issues with a N14 and M11 ) Post: #5 | |||
| |||
RE: Connection issues with a N14 and M11 (05-29-2024 )Chaney7c Wrote: Could it be that I need the 2 pin powered adapter? I don't work on N14 engines ... they belong in a museum (or used in non-commercial applications) at this point. However, the last time I connected to one, about 5 or 6 years ago, I did so on the 2-pin connector out on the engine harness itself, using my inline-5 adapter and the 2-pin plug adapter (part of the "weather-pack" connector kit) that came with it. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Connection issues with a N14 and M11 - Chaney7c - 05-25-2024, RE: Connection issues with a N14 and M11 - Rawze - 05-25-2024, RE: Connection issues with a N14 and M11 - Chaney7c - 05-25-2024, RE: Connection issues with a N14 and M11 - Chaney7c - 05-29-2024, RE: Connection issues with a N14 and M11 - Rawze - 05-29-2024 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.