Cummins X15 after treatment issues

[Envirotec]

(06-19-2024 )tree98 Wrote:  Did you reset the soot counter when you reinstalled the cans after cleaning? That counter only counts up and it doesn't know if the cans have been cleaned unless you tell it. This is easily done using insite.

If you run these engines with the exhaust pipe disconnected from the back of the turbo, do they smoke like crazy ?

What makes you think the turbo would be to blame for any of this? Are you also getting codes pertaining to the turbo ?

Not a crazy amount of soot. Seems normal. After a second of full throttle it clears up immediately. And yes I reset the filter through the advance ECM to let INSITE know a “new filter” was installed. Not sure if this is the same as the counter you mention?