Cm570 help

[Corzlot]

I do appreciate that you did go into it in a little more depth. I'm definitely not trying to start any arguments. I do see that an 870 will not work, and I was trying to know why beyond "wiring". If it's possible to wire an 870 or 871 as it needs to be, what would it take? Dpf is not an option around here. And what I'm looking at is the more simple, the better. And I sure can't argue about my boss being short sighted. It's about now, not later. But I do understand the logic about fixing the 570 compared to the 870. What I was looking for was someone to say exactly what you said. Either: it will work, just switch all this, or: it won't work because the newer engine has this different on it and they aren't compatible. But you did almost fully answer the question I originally asked. I wasn't searching for someone to tell me that I'm correct. I wanted someone to tell me why my thought is wrong. I knew I wasn't correct, but wanted to know why. If it comes down to it, we do plan on pulling apart a running, working tractor(and I mean agricultural) to make it work again. But that's another short sighted view to make something happen right now instead of fixing the problem. I would rather pull the motor out, strip it down, figure out what happen, rectify the problem, put the motor back in, and have two tractors. But it's ultimately not my call. I do thank you for the information you did give me. So far your last post was the most useful information I have gotten anywhere. I still do apologize for coming off like a jerk and someone who knows nothing. The only way I find out what I don't know is research and asking people who do. And so far this forum has been the most useful one I've found out of any that I have come across.